Hardware compatibility list
Product version
2024/07/01 00:08:00
Initial version of HCL released.
For SAFEQ Cloud to send print job data to printers, a Document Output Service must be able to deliver data to the printers IP address on port 9100 or IPP (for more details see section Ports and Protocols in the documentation).
All devices (incl. devices not covered by the list) are compatible with YSoft SAFEQ offline accounting provided they support PCL, PostScript or HPGL print language.
All devices (incl. devices not covered by the list) are compatible with YSoft SAFEQ offline accounting provided they support PCL, PostScript or HPGL print language.
Do you have any questions or feedback regarding the Hardware Compatibility List?
How can we help you?
Displayed parameters
(9 Selected)
Devices list
VendorPlease select... |
Model |
Family |
MFDShow compatible only |
A3Show compatible only |
ColorShow compatible only |
DuplexShow compatible only |
Smart cableShow compatible only |
Online accounting driverShow compatible only |
Pure Cloud TerminalShow compatible only |
Secondary Gateway Embedded TerminalShow compatible only |
Online Accounting Driver LimitationsShow compatible only |
Payment systemShow compatible only |
USB Card ReaderShow compatible only |
LD LicenseShow compatible only |
Finishing OptionsShow compatible only |
SAFEQ 5 Embedded TerminalShow compatible only |
SAFEQ 6 Embedded TerminalShow compatible only |
CommentShow compatible only |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Aurora | AD 400 MNF | Yes |
No |
No |
No |
No |
No |
Yes |
No |
Untested |
No |
No |
No |
No |
||||
| Aurora | AD400MNF | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-BW-A4-8500 | No |
No |
Recommended driver: BROTHER-MFP-BW-A4-8500 Limitations: Status detection during scan is FALSEt supported. | No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 Build 41 is required to install Embedded Terminal to Aurora AD400MNF.
FW version bellow or newer supporting BSI is required to install Embedded Terminal.
Main Firmware Version: A
Sub1 Firmware Version: 1.00
Terminal type must be "Embedded Terminal for Brother", but NOT "Embedded Terminal for Aurora".
Scan workflows' setting "Sides -> Duplex" is not supported for Scanning from ADF. Scan does not start if Duplex is set and papers are set in ADF. (Device FW limitation. Release of the new FW with improvement is planned by the end of March 2020.)
Rule Base Engine "Watermark" does not work with AD400MNF printer driver which generates the proprietary command. Use YSF Universal Print Driver instead if you want to use Watermark.
|
|
| Aurora | ADC225 | Yes |
Yes |
Yes |
Yes |
No |
No |
No |
req. SAFEQ-46592 | Yes |
Yes |
No |
No |
Yes |
Yes |
Tested Controler ROM version for SafeQ5:
A90G0Y0-8100-G00-03
Authentication cache not yest tested for SafeQ 6.
|
||
| Aurora | ADC265 | Yes |
Yes |
Yes |
Yes |
No |
No |
No |
req. SAFEQ-46592 | Yes |
Yes |
No |
No |
Yes |
Yes |
Tested Controler ROM version for SafeQ5:
A90G0Y0-8100-G00-03
Authentication cache not yest tested for SafeQ 6.
|
||
| Aurora | AD168 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-BIZHUB-210 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-BIZHUB-210 Limitations: There are 7 seconds timeouts after copy and print. Counters for copy and print are shared. Additional busy state recognition from number of active jobs. A device must be set to mode 2. | No |
Untested |
No |
No |
No |
No |
Only Konica Minolta controllers are supported. Online accounting does not work with external EFI controllers.
|
|
| Aurora | AD218 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-BIZHUB-210 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-BIZHUB-210 Limitations: There are 7 seconds timeouts after copy and print. Counters for copy and print are shared. Additional busy state recognition from number of active jobs. A device must be set to mode 2. | No |
Untested |
No |
No |
No |
No |
Only Konica Minolta controllers are supported. Online accounting does not work with external EFI controllers.
|
|
| Aurora | AD258 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-BIZHUB | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. | No |
Untested |
No |
No |
No |
No |
Only Konica Minolta controllers are supported. Online accounting does not work with external EFI controllers.
|
|
| Aurora | AD358 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-BIZHUB | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. | No |
Untested |
No |
No |
No |
No |
Only Konica Minolta controllers are supported. Online accounting does not work with external EFI controllers.
|
|
| Aurora | AD428 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-BIZHUB | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. | No |
Untested |
No |
No |
No |
No |
||
| Aurora | AD508 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-BIZHUB | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. | No |
Untested |
No |
No |
No |
No |
||
| Aurora | AD288 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-BIZHUB | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | AD368 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-BIZHUB | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | AD426 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-BIZHUB | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. | Yes |
Yes |
No |
No |
Yes |
No |
Native: HDD: 250GB (HDD HD-516), Memory: 1,5GB for Account Maps accounting
Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 1,5GB (extended memory UK-201) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 1,5GB (extended memory UK-201), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
|
|
| Aurora | AD506 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-BIZHUB | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. | No |
Untested |
No |
No |
Yes |
No |
Native: HDD: 250GB (HDD HD-516), Memory: 1,5GB for Account Maps accounting
Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 1,5GB (extended memory UK-201) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 1,5GB (extended memory UK-201), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
|
|
| Aurora | AD166 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-A3-211 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-211 Limitations: There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy. Counters for copy and print are shared. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | AD216 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-A3-211 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-211 Limitations: There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy. Counters for copy and print are shared. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | AD219 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There are 3 seconds timeout after copy. Counters for copy and print are shared. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | AD289 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2, MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
Recommended driver: MIFALSELTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2 Limitations: There are 3 seconds timeouts after copy and print. Additional busy state recognition from number of active jobs. This driver is suitable for Mode2 accounting. Offline copy accounting enabled. A3 scan is accounted as 2xA4. Each scan is accounted also as a copy with 0 pages. Separate counters for print and copy. MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Native: HDD: 250GB (HDD HD-516), Memory: 2GB
Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203)
Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
|
|
| Aurora | AD369 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2, MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
Recommended driver: MIFALSELTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2 Limitations: There are 3 seconds timeouts after copy and print. Additional busy state recognition from number of active jobs. This driver is suitable for Mode2 accounting. Offline copy accounting enabled. A3 scan is accounted as 2xA4. Each scan is accounted also as a copy with 0 pages. Separate counters for print and copy. MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
No |
Yes |
Yes |
Native: HDD: 250GB (HDD HD-516), Memory: 2GB
Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203)
Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
|
|
| Aurora | AD429 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2, MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
Recommended driver: MIFALSELTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2 Limitations: There are 3 seconds timeouts after copy and print. Additional busy state recognition from number of active jobs. This driver is suitable for Mode2 accounting. Offline copy accounting enabled. A3 scan is accounted as 2xA4. Each scan is accounted also as a copy with 0 pages. Separate counters for print and copy. MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Native: HDD: 250GB (HDD HD-516), Memory: 2GB
Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203)
Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
|
|
| Aurora | ADC258 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-BIZC250 | No |
No |
Recommended driver: MIFALSELTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2. | No |
Untested |
No |
No |
No |
No |
||
| Aurora | ADC256 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-BIZC250 | No |
No |
Recommended driver: MIFALSELTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2. | Yes |
Yes |
No |
No |
Yes |
No |
Native: HDD: 250GB (HDD HD-516), Memory: 1,5GB for Account Maps accounting Native with MyPanel: HDD: 250GB (HDD HD-516) Memory:1,5GB extended memory UK-201
Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory:1,5GB extended memory UK-201, LK-101 iOption License Kit Recommended latest FW for embedded terminal.
|
|
| Aurora | ADC358 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-BIZC250 | No |
No |
Recommended driver: MIFALSELTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2. | Yes |
Yes |
No |
No |
Yes |
No |
Native: HDD: 250GB (HDD HD-516), Memory: 1,5GB for Account Maps accounting Native with MyPanel: HDD: 250GB (HDD HD-516) Memory:1,5GB extended memory UK-201
Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory:1,5GB extended memory UK-201, LK-101 iOption License Kit Recommended latest FW for embedded terminal.
|
|
| Aurora | ADC218 | Yes |
Yes |
Yes |
Yes |
No |
MIFALSELTA-BIZC250 | No |
No |
Recommended driver: MIFALSELTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2. | No |
Untested |
No |
No |
No |
No |
||
| Aurora | ADC288 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-BIZC250 | No |
No |
Recommended driver: MIFALSELTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Native:
HDD: 250GB, Memory: 2GB
Native with MyPanel:
DD: 250GB Memory: 3GB (extended memory UK-203)
Browser with/without MyPanel:
HDD: 250GB Memory: 3GB (extended memory UK-203) LK-101v2 iOption License Kit
Recommended latest FW for embedded terminal.
|
|
| Aurora | ADC368 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-BIZC250 | No |
No |
Recommended driver: MIFALSELTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Native:
HDD: 250GB, Memory: 2GB
Native with MyPanel:
DD: 250GB Memory: 3GB (extended memory UK-203)
Browser with/without MyPanel:
HDD: 250GB Memory: 3GB (extended memory UK-203) LK-101v2 iOption License Kit
Recommended latest FW for embedded terminal.
|
|
| Aurora | ADC285 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-COL-A3-CXXXE-V2, MIFALSELTA-MFP-COL-A3-CXXXE-V3, MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MIFALSELTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Native: HDD: 250GB and Memory: 2GB built in by default
Native with MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204)
Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58).
USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0
Card registration and billing code selection in the same authentication causes the terminal to stay in main authentication screen.
|
|
| Aurora | ADC286 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-COL-A3-CXXXE-V2, MIFALSELTA-MFP-COL-A3-CXXXE-V3, MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MIFALSELTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Browser with/without MyPanel:
HDD: 250GB Memory: 4GB (extended memory UK-204)
LK-101v3 iOption License Kit (LK-101)
OpenApi version 3.7.2 supported so far.
When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
|
|
| Aurora | ADC366 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-COL-A3-CXXXE-V2, MIFALSELTA-MFP-COL-A3-CXXXE-V3, MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MIFALSELTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Browser with/without MyPanel:
HDD: 250GB Memory: 4GB (extended memory UK-204)
LK-101v3 iOption License Kit (LK-101)
OpenApi version 3.7.2 supported so far.
When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
|
|
| Aurora | ADC223 | Yes |
Yes |
Yes |
Yes |
No |
MIFALSELTA-MFP-COL-A3-C221-M1 / MIFALSELTA-MFP-COL-A3-C221-M2 | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-C221-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. This driver is for "total counter mode 1" MFD setting. MIFALSELTA-MFP-COL-A3-C221-M2 here is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) This driver is for "total counter mode 2" MFD setting. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | ADC283 | Yes |
Yes |
Yes |
Yes |
No |
MIFALSELTA-MFP-COL-A3-C221-M1 / MIFALSELTA-MFP-COL-A3-C221-M2 | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-C221-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. This driver is for "total counter mode 1" MFD setting. MIFALSELTA-MFP-COL-A3-C221-M2 here is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) This driver is for "total counter mode 2" MFD setting. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | ADC227 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-COL-A3-CXXXE-V3, MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
No |
Yes |
Yes |
Tested FW: A7970Y0-0100-G00-10(00) Supports SafeQ 6 Basic and Advanced Finishing Options. SafeQ 6 Universal Print Driver compatible.
|
|
| Aurora | ADC287 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-COL-A3-CXXXE-V3, MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Tested FW: A7970Y0-0100-G00-10(00) Supports SafeQ 6 Basic and Advanced Finishing Options. SafeQ 6 Universal Print Driver compatible.
|
|
| Aurora | ADC307 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-COL-A3-CXXXE-V2, MIFALSELTA-MFP-COL-A3-CXXXE-V3, MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MIFALSELTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
|
|
| Aurora | ADC367 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-COL-A3-CXXXE-V2, MIFALSELTA-MFP-COL-A3-CXXXE-V3, MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MIFALSELTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
No |
Yes |
Yes |
To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
|
|
| Aurora | ADC456 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-COL-A3-CXXXE-V2, MIFALSELTA-MFP-COL-A3-CXXXE-V3, MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MIFALSELTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Browser with/without MyPanel:
HDD: 250GB Memory: 4GB (extended memory UK-204)
LK-101v3 iOption License Kit (LK-101)
OpenApi version 3.7.2 supported so far.
When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
|
|
| Aurora | ADC556 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-COL-A3-CXXXE-V2, MIFALSELTA-MFP-COL-A3-CXXXE-V3, MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MIFALSELTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Browser with/without MyPanel:
HDD: 250GB Memory: 4GB (extended memory UK-204)
LK-101v3 iOption License Kit (LK-101)
OpenApi version 3.7.2 supported so far.
When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
|
|
| Aurora | ADC455 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-COL-A3-CXXXE-V3, MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Tested Controler ROM version for SafeQ5:
A79J0Y0-0100-G00-10
Tested FW for SafeQ 4: G00-21
|
|
| Aurora | ADC555 | Yes |
Yes |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-COL-A3-CXXXE-V3, MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW | No |
No |
Recommended driver: MIFALSELTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MIFALSELTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Tested Controler ROM version for SafeQ5: A79J0Y0-0100-G00-10
Tested FW for SafeQ 4: G00-21
|
|
| Aurora | AD208 | Yes |
Yes |
No |
Yes |
No |
MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There are 3 seconds timeout after copy. Counters for copy and print are shared. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | AD228 | Yes |
Yes |
No |
Yes |
No |
MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There is 3 seconds timeout after copy. Counters for copy and print are shared. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | AD248 | Yes |
Yes |
No |
Yes |
No |
MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There is 3 seconds timeout after copy. Counters for copy and print are shared. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | AD268 | Yes |
Yes |
No |
Yes |
No |
MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There is 3 seconds timeout after copy. Counters for copy and print are shared. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | AD308 | Yes |
Yes |
No |
Yes |
No |
MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There are 3 seconds timeout after copy. Counters for copy and print are shared. | No |
Untested |
No |
No |
No |
No |
Embedded terminal not supported.
|
|
| Aurora | AD289e | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-A3-XXXE, MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Browser with/without MyPanel:
HDD: 250GB Memory: 4GB (extended memory UK-204)
LK-101v3 iOption License Kit (LK-101)
|
|
| Aurora | AD369e | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-A3-XXXE, MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Browser with/without MyPanel:
HDD: 250GB Memory: 4GB (extended memory UK-204)
LK-101v3 iOption License Kit (LK-101)
|
|
| Aurora | AD289S | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-A3-XXXE, MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Recommended latest firmware (above G00-24).
To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
|
|
| Aurora | AD369S | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-A3-XXXE, MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Recommended latest firmware (above G00-24).
To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
|
|
| Aurora | AD456 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-A3-XXXE, MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Browser with/without MyPanel:
HDD: 250GB Memory: 4GB (extended memory UK-204)
LK-101v3 iOption License Kit (LK-101)
|
|
| Aurora | AD556 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-A3-XXXE, MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Browser with/without MyPanel:
HDD: 250GB Memory: 4GB (extended memory UK-204)
LK-101v3 iOption License Kit (LK-101)
|
|
| Aurora | AD656 | Yes |
Yes |
No |
Yes |
Yes |
MIFALSELTA-MFP-BW-A3-XXXE, MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. When blocked with Vender2 cable, online accounting does FALSEt work, machine is FALSEt increasing counters. This problem can be solved by using firmware version GD1-83 | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Browser with/without MyPanel:
HDD: 250GB Memory: 4GB (extended memory UK-204)
LK-101v3 iOption License Kit (LK-101)
OpenApi version 3.7.2 supported so far.
|
|
| Aurora | AD756 | Yes |
No |
Yes |
Yes |
Yes |
MIFALSELTA-MFP-BW-A3-XXXE, MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
Recommended driver: MIFALSELTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. When blocked with Vender2 cable, online accounting does FALSEt work, machine is FALSEt increasing counters. This problem can be solved by using firmware version GD1-83 | Yes |
Yes |
No |
Yes |
Yes |
Yes |
Browser with/without MyPanel:
HDD: 250GB Memory: 4GB (extended memory UK-204)
LK-101v3 iOption License Kit (LK-101)
OpenApi version 3.7.2 supported so far.
|
|
| Aurora | AD775 | Yes |
Yes |
No |
Yes |
No |
MIFALSELTA-MFP-BW-A3-XXXE-V3, MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 | No |
No |
MIFALSELTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MIFALSELTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used This driver is for "total counter mode 1" MFD setting. | Yes |
Yes |
No |
Yes |
Yes |
Yes |
||
| Brother | MFC-L8390CDW | MFC | Yes |
No |
Yes |
Yes |
No |
No |
No |
No |
Untested |
No |
No |
No |
No |
|||
| Brother | MFC-L8340CDW | MFC | Yes |
No |
Yes |
Yes |
No |
No |
No |
No |
Untested |
No |
No |
No |
No |
|||
| Brother | HL-L8240CDW | HL | No |
No |
Yes |
Yes |
No |
No |
No |
No |
Untested |
No |
No |
No |
No |
|||
| Brother | HL-L8230CDW | HL | No |
No |
Yes |
Yes |
No |
No |
No |
No |
Untested |
No |
No |
No |
No |
|||
| Brother | MFC-6710DW | MFC | Yes |
No |
No |
Yes |
No |
No |
No |
No |
Untested |
No |
No |
No |
No |
|||
| Brother | MFC-L5710DW | MFC | Yes |
No |
No |
Yes |
No |
No |
No |
No |
Untested |
No |
No |
No |
No |
|||
| Brother | MFC-L5710DN | MFC | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
|||
| Brother | DCP-L5510DW | DCP | Yes |
No |
No |
Yes |
No |
No |
No |
No |
Untested |
No |
No |
No |
No |
|||
| Brother | ADS-4900W | No |
No |
No |
No |
No |
No |
No |
Scanner Only | No |
Yes |
No |
No |
No |
No |
Scanner Only
|
||
| Brother | ADS-4700W | No |
No |
No |
No |
No |
No |
No |
Scanner Only | No |
Untested |
No |
No |
No |
No |
|||
| Brother | MFC-L6970DW | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
|||
| Brother | MFC-L9577CDW | Yes |
No |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
|||
| Brother | MFC-8540DN | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother Enhanced PCL driver recommended.
|
|||
| Brother | HL-J6100DW | No |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 and newer
Requires EAP license
Brother Enhanced PCL driver recommended.
|
|||
| Brother | HL-J6000DW | No |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother Enhanced PCL driver recommended.
|
|||
| Brother | MFC-J5945DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother Enhanced PCL driver recommended.
|
|||
| Brother | MFC-J6945DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother Enhanced PCL driver recommended.
|
|||
| Brother | HL-L8360CDW | No |
No |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
Tested model FW:
Main Firmware Version: 1.34
Sub1 Firmware Version: 1.14
Supported from MU27 with EAP license YSQL6-047-0000. Build 34 Summer 2019 and newer does not require EAP license YSQL6-047-0000.
Rule Base Engine limitations
RBE action "Watermark" work only with YSF Universal Print Driver or Brother Enhanced Generic PCL Driver on the model.
RBE action "Duplex" work only with YSF Universal Print Driver or Brother Enhanced Generic PCL Driver on the model
RBE action “Number of Copies” causes infinite print on the model on the model.
|
|||
| Brother | MFC-L9670CDN | Yes |
No |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-L9635CDN | MFC | Yes |
No |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
|||
| Brother | MFC-L9630CDN | MFC | Yes |
No |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
Ysoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
||
| Brother | MFC-L9610CDN | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-L6902DW | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-L5755DW | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-L5750DW | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-L5702DW | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-L5700DW | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J7600CDW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J7500CDW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J6999CDW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J6997CDW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | DCP-L5650DN | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-BW-A4-7065DN | No |
Yes |
Recommended driver: BROTHER-MFP-BW-A4-7065DN Limitations: Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. | No |
Yes |
No |
No |
No |
No |
||
| Brother | MFC-L6700DW | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-BW-A4-7065DN | No |
Yes |
Recommended driver: BROTHER-MFP-BW-A4-7065DN Limitations: Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. | No |
Untested |
No |
No |
No |
No |
||
| Brother | MFC-L6900DW | Brother | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-BW-A4-7065DN | No |
Yes |
Recommended driver: BROTHER-MFP-BW-A4-7065DN Limitations: Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. | No |
Yes |
Yes |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
| Brother | HL- 6180DW | Brother | No |
No |
No |
Yes |
No |
BROTHER-PRN-BW-A4-HL6180DW | No |
Yes |
Recommended driver:BROTHER-PRN-BW-A4-HL6180DW Limitations:Duplex print is accounted according to parser from job information. | No |
Untested |
No |
No |
No |
No |
|
| Brother | HL-5350DN | Brother | No |
No |
No |
Yes |
No |
BROTHER-PRN-COL-A4-HL4570 | No |
Yes |
Recommended driver:BROTHER-PRN-COL-A4-HL4570 Limitations:Duplex print is accounted according to parser from job information. | No |
Untested |
No |
No |
No |
No |
|
| Brother | HL-5250DN | Brother | No |
No |
No |
Yes |
No |
BROTHER-PRN-COL-A4-HL4570 | No |
Yes |
Recommended driver:BROTHER-PRN-COL-A4-HL4570 Limitations:Duplex print is accounted according to parser from job information. | No |
Untested |
No |
No |
No |
No |
|
| Brother | HL-4570CDW | Brother | No |
No |
Yes |
Yes |
No |
BROTHER-PRN-COL-A4-HL4570 | No |
Yes |
Recommended driver:BROTHER-PRN-COL-A4-HL4570 Limitations:Duplex print is accounted according to parser from job information. | No |
Untested |
No |
No |
No |
No |
|
| Brother | MFC-L8850CDW | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-A4-9020CDW | No |
Yes |
Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is FALSEt ready for authentication during sleep mode. Device must be woken up before authentication or direct print. | No |
Untested |
No |
No |
No |
No |
|
| Brother | MFC-L9550CDW | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-A4-9020CDW | No |
Yes |
Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is FALSEt ready for authentication during sleep mode. Device must be woken up before authentication or direct print. | No |
Untested |
No |
No |
No |
No |
|
| Brother | DCP-7055DCP-7055WDCP-7057DCP-7057WDCP-7060DDCP-7065DNDCP-7070DWMFC-7360MFC-7360NMFC-7362NMFC-7365DNMFC-7460DNMFC-7470DMFC-7820NMFC-7860DNMFC-7860DWFAX-7860DWHL-2280DW | Brother | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-BW-A4-7065DN | No |
Yes |
Recommended driver: BROTHER-MFP-BW-A4-7065DN Limitations: Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. | No |
Untested |
No |
No |
No |
No |
|
| Brother | HL-S7000DN | Brother | No |
No |
No |
Yes |
No |
BROTHER-PRN-BW-A4-HLS7000DN | No |
Yes |
Recommended driver:BROTHER-PRN-BW-A4-HLS7000DN Limitations: There is a 1.5 second timeout after print. | No |
Untested |
No |
No |
No |
No |
|
| Brother | MFC-9340CDW | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-A4-9020CDW | No |
Yes |
Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is FALSEt ready for authentication during sleep mode. Device must be woken up before authentication or direct print. | No |
Untested |
No |
No |
No |
No |
|
| Brother | MFC-9330CDW | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-A4-9020CDW | No |
Yes |
Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is FALSEt ready for authentication during sleep mode. Device must be woken up before authentication or direct print. | No |
Untested |
No |
No |
No |
No |
|
| Brother | MFC-9140CDN | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-A4-9020CDW | No |
Yes |
Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is FALSEt ready for authentication during sleep mode. Device must be woken up before authentication or direct print. | No |
Untested |
No |
No |
No |
No |
|
| Brother | MFC-9130CW | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-A4-9020CDW | No |
Yes |
Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is FALSEt ready for authentication during sleep mode. Device must be woken up before authentication or direct print. | No |
Untested |
No |
No |
No |
No |
|
| Brother | DCP-9020CDN | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-A4-9020CDW | No |
Yes |
Recommended driver: BROTHER-MFP-COL-A4-9020CDW Limitations: If the device runs out of paper during print/copy, counter differences may occur. Device is FALSEt ready for authentication during sleep mode. Device must be woken up before authentication or direct print. | No |
Untested |
No |
No |
No |
No |
YSoft SafeQ 6 MU30 and newer
|
| Brother | DCP-9020CDW | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-A4-9020CDW | No |
Yes |
Recommended driver: BROTHER-MFP-COL-A4-9020CDW Limitations: If the device runs out of paper during print/copy, counter differences may occur. Device is FALSEt ready for authentication during sleep mode. Device must be woken up before authentication or direct print. | No |
Untested |
No |
No |
No |
No |
YSoft SafeQ 6 MU30 and newer
|
| Brother | HL-4150CDN | Brother | No |
No |
Yes |
Yes |
No |
BROTHER-PRN-COL-A4-HL4140CN | No |
Yes |
Recommended driver:BROTHER-PRN-COL-A4-HL4140CN Limitations:Duplex print is accounted according to parser from job information. | No |
Untested |
No |
No |
No |
No |
|
| Brother | HL-4140CN | Brother | No |
No |
Yes |
Yes |
No |
BROTHER-PRN-COL-A4-HL4140CN | No |
Yes |
Recommended driver:BROTHER-PRN-COL-A4-HL4140CN Limitations:Duplex print is accounted according to parser from job information. | No |
Untested |
No |
No |
No |
No |
|
| Brother | HL-5470DW | Brother | No |
No |
No |
Yes |
No |
BROTHER-PRN-BW-A4-HL5440D | No |
Yes |
No |
Untested |
No |
No |
No |
No |
||
| Brother | HL-5450DN | Brother | No |
No |
No |
Yes |
No |
BROTHER-PRN-BW-A4-HL5440D | No |
Yes |
No |
Untested |
No |
No |
No |
No |
||
| Brother | HL-5440D | Brother | No |
No |
No |
Yes |
No |
BROTHER-PRN-BW-A4-HL5440D | No |
Yes |
No |
Untested |
No |
No |
No |
No |
||
| Brother | DCP-9270CDN | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-9460CDN | No |
Yes |
Recommended driver:BROTHER-MFP-COL-9460CDN Limitations:Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. Scan from USB is FALSEt accounted. Status detection during scan is supported for following languages: English, Hungarian. | No |
Untested |
No |
No |
No |
No |
|
| Brother | DCP-9055CDN | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-9460CDN | No |
Yes |
Recommended driver:BROTHER-MFP-COL-9460CDN Limitations:Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. Scan from USB is FALSEt accounted. Status detection during scan is supported for following languages: English, Hungarian. | No |
Untested |
No |
No |
No |
No |
|
| Brother | MFC-9970CDW | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-9460CDN | No |
Yes |
Recommended driver:BROTHER-MFP-COL-9460CDN Limitations:Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. Scan from USB is FALSEt accounted. Status detection during scan is supported for following languages: English, Hungarian. | No |
Untested |
No |
No |
No |
No |
|
| Brother | MFC-9460CDN | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COL-9460CDN | No |
Yes |
Recommended driver:BROTHER-MFP-COL-9460CDN Limitations:Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. Scan from USB is FALSEt accounted. Status detection during scan is supported for following languages: English, Hungarian. | No |
Untested |
No |
No |
No |
No |
|
| Brother | MFC-8952DW | Brother | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-DUP-8950DW | No |
Yes |
No |
Untested |
No |
No |
No |
No |
||
| Brother | MFC-8950DW | Brother | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-DUP-8950DW | No |
Yes |
No |
Untested |
No |
No |
No |
No |
||
| Brother | MFC-8910DW | Brother | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-DUP-8950DW | No |
Yes |
No |
Untested |
No |
No |
No |
No |
||
| Brother | MFC-8860DN | Brother | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-BW | No |
Yes |
Recommended driver:BROTHER-MFP-BW Limitations:Counters for copy and print are shared. Additional busy state recognition from special OID. | No |
Untested |
No |
No |
No |
No |
|
| Brother | MFC-8520DN | Brother | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-DUP-8950DW | No |
Yes |
No |
Untested |
No |
No |
No |
No |
||
| Brother | MFC-8510DN | Brother | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-DUP-8950DW | No |
Yes |
No |
Untested |
No |
No |
No |
No |
||
| Brother | DCP-9045CDN | Brother | Yes |
No |
Yes |
Yes |
No |
BROTHER-MFP-COLOR | No |
Yes |
No |
Untested |
No |
No |
No |
No |
no blocking available
|
|
| Brother | DCP-8250DN | Brother | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-DUP-8950DW | No |
Yes |
No |
Untested |
No |
No |
No |
No |
||
| Brother | DCP-8110DN | Brother | Yes |
No |
No |
Yes |
No |
BROTHER-MFP-DUP-8950DW | No |
Yes |
No |
Untested |
No |
No |
No |
No |
||
| Brother | HL-L6410DN | HL | No |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
|||
| Brother | MFC-L6910DN | MFC | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. |
||
| Brother | ADS-3600W | No |
No |
No |
No |
No |
No |
No |
Scanner Only | No |
Yes |
No |
No |
No |
Yes |
Single function scanner - SafeQ Print application is not supported.
Firmware: P1907111512/M1512081018 and newer.
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
||
| Brother | ADS-2800W | No |
No |
No |
No |
No |
No |
No |
Scanner only | No |
Yes |
No |
No |
No |
Yes |
Single function scanner - SafeQ Print application is not supported.
Firmware: P1907111512/M1512081018 and newer.
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
||
| Brother | DCP-L6600DW | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 and newer
Requires EAP license
|
|||
| Brother | MFC-L5750 | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Requires EAP license
|
|||
| Brother | MFC-L6800DW | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
|||
| Brother | MFC-L6000DW | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
|||
| Brother | MFC-L6950DW | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
|||
| Brother | MFC-L9670DW | Yes |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
|||
| Brother | HL-L6300DW/T | No |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
|||
| Brother | HL-L6400DW/T | No |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
Yes |
No |
No |
Yes |
“/T” of HL-L6400DW/T stands for the Tower Tray.
Tested model FW:
Main Firmware Version: 1.80
Sub1 Firmware Version: 1.53
Supported from MU27 with EAP license YSQL6-047-0000. Build 34 Summer 2019 and newer does not require EAP license YSQL6-047-0000.
Rule Base Engine limitations
RBE action "Watermark" work only with YSF Universal Print Driver or Brother Enhanced Generic PCL Driver on the model.
RBE action "Duplex" work only with YSF Universal Print Driver or Brother Enhanced Generic PCL Driver on the model
RBE action “Number of Copies” causes infinite print on the model on the model.
|
|||
| Brother | HL-L6450DN | No |
No |
No |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
|||
| Brother | MFC-L8690CDW | Yes |
No |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Firmware from April 2019 and later required.
|
|||
| Brother | MFC-L8900CDW | Yes |
No |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
Yes |
YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
|
|||
| Brother | MFC-J6957DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J6955DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J6935DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J6930DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J6730DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J6580CDW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J6535DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J6530DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J5955DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J5930DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J5830DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J5730DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J5335DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J5330DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J3930DW | Yes |
Yes |
Yes |
Yes |
No |
No |
Yes |
No |
Yes |
No |
No |
No |
No |
||||
| Brother | MFC-J3530DW | Yes |
Yes |
Yes |
Yes |
No |